Expert Answers about RV Sewer Hose Support
- Collapsable Sewer Hose Support for Shorter Length Hoses
- A collapsable sewer hose support will absolutely still give you adequate drainage even if it is not fully extended,.
I do strongly recommend a high-quality support system such as the Sidewinder RV Sewer Hose Support System # CAM43051 which extends 20' and collapses to 12-1/2", measuring 9-3/4" tall and sloping down to 6-3/4" tall from beginning to end, regardless of if it is extended or not. The Sidewinder Support System works with standard 3" sewer hoses and has snap-fit hinges which...
view full answer... - Fitment of EZ Coupler 4-in-1 Threaded RV Sewer Adapter
- The EZ Coupler 4-in-1 Threaded RV Sewer Adapter, # F02-3305VP fits threaded sewer inlets. You can attach and remove as needed for storage.
view full answer... - Solution for Waste Water Staying in Sewer Hoses on RV
- What I strongly recommend instead that will fix your problem is the Flush King Reverse Flush Valve for RV Holding Tanks and Sewer Hoses - 3" Diameter # F02-4350 because it is designed for the exact problem you are having. It will flush the hoses so the waste water does not stay the "T" on your photo. It would require you to hook up a hose, Flushing Hose for RV Sewer System # W01-4180 (15 feet) or # W01-4300 (25 feet) but would be the remedy to your issue.
I have added a link to a video...
view full answer... - Is the Interior of Lippert Waste Master RV Sewer Hose LC359724 Smooth
- The Lippert Waste Master RV Sewer Hose # LC359724 is constructed with an exterior helical coil that lets it extend from its compressed length of 5-feet up to its 20-foot maximum length. The interior white surface of the 3-inch diameter hose is smooth, but if not extended fully the exterior coils will cause the interior to have small circular bumps. The linked photo will help you see what I refer to. The more extended the hose is, the smoother the interior surface will be.
view full answer... - Warranty of Viper RV Sewer Hose
- The Viper RV Sewer Hoses w/ Swivel Fittings and 4-in-1 Clear Elbow Adapter - 20' Long # D04-0475 has a 1-year warranty.
view full answer... - Will RhinoEXTREME RV Sewer Hose CAM39861 Benefit from Sun/UV Protection
- UV rays and extreme heat are tough on any materials, even ones made specifically for the outdoor environment. I would say that nearly four years of trouble-free service from your RhinoEXTREME RV sewer hose # CAM39861 is pretty good considering your severe environment. This is their heaviest-duty sewer hose.
My contact at Camco agreed that you must have taken good care of this item since it lasted for almost 4 years in the Arizona desert. My contact also agreed that anything you can do...
view full answer... - Will The Valterra Clearview Adapter Fit In A 4-1/2 Inch Sewage Hose Carrier.
- Thanks for reaching out, lets see what we can find.
**Valterra Clearview Adapter for RV Sewer Hose - 3" Bayonet Fitting - 45 Degree - Clear Plastic # F02-3111.
This unit will be over 5 inches thick, the bayonet fitting is right at 4 inches but the elbow joint makes it to wide.
view full answer... - EZ Coupler 4-in-1 Threaded RV Sewer Adapter With 90-Degree Elbow Fitting
- The EZ Coupler 4-in-1 Threaded RV Sewer Adapter with 90-Degree Elbow Fitting - Red Item # F02-3305VP comes with the cap for the end that drops into the dump station tube. Typically once you install the fitting onto your hose it doesn't need to be removed you would just place the cap on the open end when you are done draining your tanks.
view full answer... - What Size Screws Are Included With The Valterra RV Sewer Hose Carrier
- The screws included with the Valterra RV Sewer Hose Carrier # A04-5094BK are #14 x 1" self-tapping screws and would require either a 10mm or 3/8" socket in order to drive them into the trailer frame. Since these are self-tapping you would not need to drill out a hole first for the screw to bite through. If you wanted to go with a beefier screw you can pick up additional ones at your local hardware store.
view full answer... - How Many Tabs Does The EZ Coupler Cap # F02-3106CL Have For the RV Drain Valve?
- The EZ Coupler Cap # F02-3106CL has 4 tabs that will fit over the 4 lugs on the sewer drain valve. It does have a 3/4" male thread hose coupler that will allow you to drain your gray water tank without needing your larger sewer hose.
It is also available in Black # F02-3106BK.
view full answer... - How to Know When Blank Tank is Full When Using Flush King Reverse Flush Valve
- Thank you for the photo, and there should be sensors with a monitor for your tank that tells you how full it is in order to use the Flush Valve for RV Holding Tanks and Sewer Hoses # F02-4350.
If you don't have that, you can still use the Flush Valve # F02-4350 but you'll want to be sure to limit the water flow going in so you don't have a real mess. But really, this is best used with black water tanks that have monitors which tell you how full it is.
This will work for you unless your...
view full answer... - What Bonding Agent Should Be Used To Attach RV Sewer Pipe Fittings
- Unfortunately just looking at a picture isn't going to be enough for me to identify what the manufacturer used to glue the 3" pipe reducer # T1041-1 to the other fitting, however I can tell you that you should use some ABS # A05-0303 when you're ready to hook up your new pipe reducer.
view full answer...
Go To Results